PENNINT CO., Ltd

BITUFLAT ™ asphalt is based on high-grade modified plaster or elastomer asphalt, the middle with non-woven polyester or composite fiber glass mesh reinforcement, the bottom surface coated PE film, the top surface coated PE film, sand, aluminum foil, mineral slate and other surface coating by high temperature drying of a flexible asphalt waterproof sheet.

Ignition application - tightly connected, no risk of leakage
High elasticity - easy to use, suitable for a variety of structures
Anti-aging formula - special formula, longer life than ordinary asphalt film
Good heat resistance, stable physical performance even at 110oC

Choose the type that works best for you:
BITUFLAT™PE - PE membrane surface
BITUFLAT™SD - with sand mask
BITUFLAT™ aluminum foil surface aluminum film
BITUFLAT™ML - Membrane sin containing mineral particles

Type thickness width/roll length/roll
BITUFLAT™PE/SD/AL/ML 3000 3.0 mm 1.0 m 10 m
BITUFLAT™PE/SD/AL/ML 4000 4.0 mm 1.0 m 10 m
BITUFLAT™PE/SD/AL/ML 5000 5.0 mm 1.0 m 10 m

Where do I apply?
BITUFLAT ™ lit asphalt film is a mature material, after more than 20 years of development, can be widely used in various types of roofing or underground engineering.