baudcom

Overview
Optical Fiber Fusion Splicer has four motors, high splice precision, small size, light weight, high reliability, dust/water/shock resistant, touch screen, can replace fujikura fusion splicer 70S.

Optical Fiber Fusion Splicer is a compact splicer that is primarily used to fuse and protect common communications strands. The splicer’s extensive functionality and extremely low splice loss make it adaptable to fiber splicing in a variety of settings. It has a light weight, small size, higher environmental adaptation, high dependability, dust/wate/shock resistant properties. To suit the needs of a wide range of clients, a variety of fusing and heating modes are provided. The high-precision ceramic V-groove, which is easy to clean and maintain, makes fiber loading more convenient and accurate. Dual-directional fusion is possible with this splicer. The touch screen monitor provides newly designed graphical interfaces that are simple to use. The large-capacity modular pluggable lithium-ion battery ensures long-term field operations. The auto environment adjustment mechanism dramatically increases the splicer’s adaptability to hostile settings, allowing for low-loss splice consistency in a variety of conditions.

Specification
Model
BD-FS-41B Optical Fiber Fusion Splicer
Motor qty
4

Alignment method
Cladding alignment, manual alignment

Applicable fibers Any common optical fibers, rubber-insulated fibers and jumpers that meet requirements of ITU-TG.651~653, ITU-TG.655 and ITU-TG.657.
Optical fiber diameter Cladding: 80～150μm, coating layer: 0.1～3mm
Cleave length 5～16mm（coated optical fiber diameter≤250μm）；10mm（coated optical fiber diameter：0.25~3mm）
Splice loss（typical） 0.02dB（SMF）; 0.01dB（MMF）; 0.04dB（DSF）; 0.04dB（NZDSF）
Return loss Better than 60dB
Splicing time (typical) 7s (Fast mode)
Heating time (typical) 18s（60mm protection sleeve）
Tension 1.96～2.25N
Protection sleeve 60mm, 40mm and a series of protection sleeves
Graphical display High-performance 4.3 inch LCD
Magnification time 320 times/88 times, 700times
Fusion records 10000 groups
Remote maintenance N/A
Battery capacity 11.1V, 5200mAh
Battery service life Cycle charging: 300～500 counts, can be replaced by customers
Electrode service life Typical: 4000 counts, can be replaced by customers
Construction lighting Built-in lights with high-brightness and wide lighting area
Working environment Temp:-10～50℃；Hum: 0～95%RH，height above sea level: 0～6000m
Operation interfaces GUI (graphical user interfaces)
External power AC: 100～240V, 60Hz, 0～1.5A; DC: 10～15V
Port USB / SD
Dimensions 120mm（W）×130mm（H）×154mm（D）（without rubber anti-vibration pad）
Weight 1.8kg （the battery not included）, 2.1kg（included the battery）

Application
BD-FS-41B Optical Fiber Fusion Splicer is compact equipment deploying the design of ergonomics, which delivers convenient operation and handy carrying case. Event very short fibers can be spliced easily. It’s capable of construction and maintenance of optical fiber line projects (including trunk), emergency repair, production and test of optical fiber devices and research and study in institutes.