BRUSTEC METALURGICA

The Brustec Chlorine Generator, consists of an electronic equipment that through the process of electrolysis in water with salt, breaking down the particles of salt (NaCl) and water (H2O) and generating the Sodium Hypochlorite (NaClO), in continuous dosage while the pump is in operation.
In this way you automate the dosage of chlorine in your pool, having only to follow up according to the use and time, adjusting through the buttons the volume of chlorine production that are divided into 5 levels, in addition to the Turbo mode in case of need to make an urgent dosage.
The equipment has protections to turn off in case the pool water is outside the operating range that is from 10 ° C to 40 ° C, alarm for lack and excess of salt, overcurrent in the cell and water level.
Remembering that the recommended residual chlorine is between 1 and 3 ppm, and to raise the level of chlorine, you just have to leave your pump longer on and the water within the parameters of the table below, in addition to that the SAL used in pools is special (No additives) and must be purchased informing that it will be used in pool.