Hebei BZ Solids Control Co.,Ltd

Drilling chip dryer is a single-stage continuous work of vertical scraper discharge drying centrifuge, also known as vertical drying centrifuge and rock chip dryer, oil drilling waste mud does not land treatment system, one of the important equipment. There are many holes in the drum wall of the drill chip dryer, the inner surface of the drum covers the filter medium, the suspension added to the drum rotates with the drum to produce a huge centrifugal pressure, under the pressure of the liquid in the suspension fluid flows through the filter medium and the hole in the drum wall is thrown out, the solid is intercepted on the surface of the filter medium, so as to achieve the separation of solids and liquids. The centrifugal force produced by the suspension in the drum is one hundred times that of gravity, which strengthens the filtration process, speeds up the filtration speed and obtains the filter slag with low moisture content.
　　Drilling chip dryer is mainly used for the separation and drying of drilling waste in oil-based mud environment, drilling chip dryer treatment of drilling chip oil content is usually less than 5%.
BZGZ series drill chip dryer technical parameters
Model BZGZ900 BZGZ900-BP
Processing capacity 30-50t/h
Drying efficiency OOC ≤5%
The sieve basket is 930mm in diameter
Sieve basket gap 0.25 to 0.5mm
Speed 900RPM 0-900RPM
Separating factor 420G 0-420G
The main motor has a power of 55Kw
The pump motor has a power of 0.55Kw
Rinse pump power 3kw
Explosion-proof standard ExdIIBt4/IECEX/A-TEX
Explosion-proof cabinet type Standard explosion-proof cabinet variable frequency explosion-proof cabinet
Weight 4300kg
Form factor 2680x1750x1650mm
Features and advantages of the North Drilling Chip Dryer:
　　1. The speed can reach 900RPM, can form 420G separation factor, effectively separate the liquid in the drill chip;
　　2. Unloading scraper made of carbide material, long service life;
　　3. Each replaceable selected part has passed the dynamic balance test, after replacing the part of the whole machine balance;
　　4. Independent oil circuit cooling system, equipped with scientific tank cooling system, to meet the use of high temperature environment needs;
　　5. The discharge port can be equipped with a spiral conveyor to facilitate the transport of drying drill chips, and continuous operation of equipment;
　　6. The tapered top cover has an observation port to check the wear of the screen and the screw scraper at any time.