Inbrasport

The ergometer cycle for physical assessment from Inbrasport is operated via the computer with varying load between 0 and 400 watts, with load increase from 01 to 01 watt. With the software you can run ErgoControl programs Ramp, Isopower, Bruce, Balke and Astrand, and other configurable protocols. Torque from 0.5 to 4.0 kg.m. Indication from 5 to 100 r.p.m.<br />
<br />
- Computerized Ergometer cycle with Control System through external computer connection bidirectional serial interface RS 232 (operation directly from your computer - without control panel).<br />
- Working position: vertical.<br />
- Working range: Load 0-400 Watts.<br />
RPM indication, 05-100 rpm.<br />
- Food: Bivolt (110V or 220V).<br />
- Torque: 0.5 - 4.0 Kg.m<br />
-Increase load from 01 to 01 Watt.<br />
- Consumption of approximately 15W.<br />
- Seat vertical and horizontal adjustment.<br />
- Handlebar with adjustable vertical and horizontal.<br />
- Adjust the level in the four feet.<br />
- Software ErgoControl qualification and operation that allows the use of both cycle ergometer with any software evaluation and physical heart.<br />
- Limit user weight: 140 kg<br />
-Approximate weight 40 Kg<br />
- Protocols and Programs: Isopower, Ramp, Bruce, Balke and Astrand, and other user-configurable, and manual operation with load increments of 01 Watt.<br />
- Parameters visible on the ergometer software: Exercise Time, Load Watts, Rpm, Torque in Kg, Current Protocol, Graphics load x time x rpm and time.<br />
- Color: Silver.<br />
-Maximum dimensions: height 1260 mm x width 550 mm. x length 1220 mm.