Mairs Intelligent Technology Co.,Ltd

First, product introduction
The entire product shape of the transfer gate using SUS304 stainless steel plate stamping molding, full high turnout using the most advanced drive control technology, can be widely changed to meet the different styles of modern buildings for intelligent access control system requirements. The transfer gate is particularly suitable for the safety and reliable protection of the exterior facilities, sports fields, entertainment venues and parking facilities of the workshop. For the automatic entrance and exit of personnel design of the turntable, a highly sophisticated system has a wide range of use, can be connected with the access card reader, ticket checker system, to prevent unauthorized access.

Second, functional characteristics
1. Gate structure characteristics: Channel gate mechanical system is divided into structural frame and movement two parts. Structural frame as a carrier, it is installed with directional reading and writing device, movement composition mainly has motors, motherboards, racks, fixed frames, transmission shafts, gates, dust-proof waterproof cover, guardrails and so on;

2. Introduction to the passage function: the direction of passage can be divided into one-way, two-way (optional), with a variety of working modes to choose from, you can read the card in both directions, can also read the card on the one hand, the other direction is prohibited, on the other hand, read the card, the other direction of free passage

3. Automatic reset function: after opening the gate, the impassable system will be automatically locked in the specified time, the passage time can be adjusted, with a unique two-way anti-reversal function, power failure can be free to rotate, to meet fire requirements.

4. Light prompt function: direction indication, control board with counting function, LED digital display function (optional), control board with memory function, can meet the group pass;

Third, technical parameters

Gate structure: frame structure / fine profile 304 stainless steel tube

Chassis size: 2300 × 1500 × height 2300 (mm)

Swing arm length: standard 590mm, transmission angle 90 degrees

Gate weight: about 200 kg/ single unit

Swing direction: One-way or two-way traffic

Supply voltage: AC220V±10%, 50HZ

Drive motor: DC electromagnet, 30W/24V

Lifetime: More than 5 million times

Switch time: 1-2 seconds

Communication interface: Standard TCP/IP communication

Operating temperature: -15C to 60C

Relative humidity: ≤ 90%, no condensation

Working environment: indoor and outdoor (with rain-proof frame)

Input interface: Relay switch signal or RS485 level signal

Communication interface: TCP/IP communication, RS485 standard (customized)

Speed: about 40 people/min (normally open), 25-30 people/min (normally closed)

Open the gate input: IC swipe card / fingerprint identification / face recognition, with standard mounting bracket, or tailor-made

Material specifications: 1.2mm thick, guardrail 1.2mm thick, shaft diameter 89mm, thickness 3.0mm, rod diameter 38mm, thickness 1.2mm

Input interface: dry contact signal or a DC12V pulse signal with a pulse width of 100ms≥ or a pulse width signal of 100ms, driving current ≥ 10mA;