medtech c&s limited

Technical Data: Cuttable material Zirconia, Wax, PMMA, Composite resin, PEEK, Gypsum Loadable workpiece shape Disc type (with step) Step section: 98.5 mm (diameter), height 10mm Body section: 95 mm (diameter), height max. 60mm Pin type Pin diameter: 6 mm Operating speed XYZ axis: 6 to 1800 mm/min. (0.24 to 70.9 in./min.) Spindle motor Brushless DC motor Spindle speed 6,000 to 30,000 rpm Rotary axis travel angle A axis ±360° B axis ±30° Number of burs housed 10 Attachable bur Shank diameter 4 mm Length 40 to 55 mm Compatible compressed air 0.02 to 0.2 MPa Interface USB Control command set RML-1, NC code Power requirements AC 100 to 240 V ± 10%, 50/60 Hz , 2.0 A (overvoltage category II, IEC 60664-1) Power consumption Approx. 200 W Operating noise During operation 70 dB (A) or less (when not cutting) During standby 45 dB (A) or less External dimensions Width x Depth x Height 495 × 660 × 600 mm (19.5 × 26.0 × 23.6 in.) Weight 67 kg (147.7 lbs.) Installation environment Indoor use, Altitude Up to 2000 m (6,562 ft.) Temperature 5 to 40 °C (41 to 104 °F) Humidity 35 to 80% (no condensation) Ambient pollution degree 2 (as specified by IEC 60664-1) Short-term temporary overvoltage 1440 V Long-term temporary overvoltage 490 V Included items Power cord, USB cable, Regulator, Air hose, Pin-type material adapter, Automatic correction jig, Detection pin, Torque screwdriver, Milling bur holders, Mounting screws, Hexagonal screwdriver, T-shaped hexagonal screwdriver, Dust collection hoses, Dust collection hose adapter, spanner, Roland Software Package CD, Torque screwdriver, Ferrite core, Manuals