Meihong electric co., ltd.

1. The shell is assembled by partially welded 8MF cold-bended steel. The mounting holes in the e-20mm and E-100mm modules are mounted on the rack to improve the versatility of product assembly. Panels and partitions are imported cold-rolled sheet, anti-corrosion process using acid-washed phosphating anti-static spray process, cabinet color by the user designated. The interior of the cabinet is hot-galvanized. For enhanced ventilation and cooling, vents are placed at the bottom and upper part of the cabinet and wire mesh is used to prevent small animals. For ease of lifting, the top corner of the cabinet is fitted with a hanging ring. Taking into account the use of the cable outlet, there is an opening at the bottom of the cabinet and a sheath is prepared to meet the requirements of the structural drawing size.
2. The design of the GGD cabinet takes into account the cooling of the cabinet during operation. The number of cooling slots varies from upper and lower ends of the cabinet. When the electrical components in the cabinet are heated, the heat rises and is discharged through the upper slot, and the cold air is continuously replenished into the cabinet through the lower slot, allowing the sealed cabinet to form a natural air passage from bottom to bottom. End the cooling.
3. GGD cabinet in accordance with the requirements of modern industrial product design, using the gold split method to design the shape of the cabinet and divide the size of each part, beautiful and generous, fresh. The hinges of the door are connected to the frame and are easy to install and remove. The mountain-shaped rubber strip is embedded in the folding edge of the door. When the door is closed, the insert between the door and the frame has a certain compressed stroke, which can not only prevent the door from cracking the cabinet, but also can improve the protection level of the door. Instrument doors with electronic components are connected to the frame via a number of soft copper coins. The mountings and frames in the cabinet are connected by rolling screws, and the entire cabinet forms a complete ground protection circuit.