PCE Ibérica S.L.

The dynamometer with external load cell is an ideal device for measuring compressive forces in hard-to-reach places. The compression load cell is connected to the dynamometer via a cable of approx. 3 m. Thanks to the small dimensions of the load cell you will be able to use it in many applications. The load cell has threaded holes at the bottom that allow fixed mounting.

The dynamometer works with a measurement quota of up to 1600 Hz. The values shown are presented in real time as a momentary value and as a graphic curve on the screen of the dynamometer itself.

You can save the values in the internal memory or transfer them in real time via the USB interface to a computer with a maximum measurement quota of 800 Hz. The software is provided with the device.

The PEAK HOLD function allows you to freeze the peak value on the dynamometer screen until this value is exceeded or erased.

The dynamometer allows you to adjust two limit values. They continuously compare the current measured value. By exceeding these values, the screen emits a signal, and through an external interface, you can use it, for example, in combination with the controller of a machine.