SATECH

TECHNICAL SPECIFICATIONS<br />
3U Metal structure for installation of 1-20 monopolar mini circuit-breakers. Suitable for installation in 19-inches racks.<br />
The product supports various configurations (quantity of circuit-breaker, circuit-breaker capacity and circuit-breaker brand), which must be defined before aquisition.<br />
The maximum capacity of the panel is limited to 20 circuit-breakers with 2 buses up to 200A each (Total: 400A).<br />
<br />
SURFACE TREATMENT AND PAINTING<br />
The parts of the metal frame are subjected to anti-corrosion treatment and painted on black epoxy ink.<br />
<br />
MECHANICAL FEATURES<br />
Input bars (-48VCC / 0V) prepared as follows:<br />
Bars (-48VCC) input power: Two copper bars with two holes each for compression terminals for cables up to 70mm². The bars are installed horizontally side by side above circuit-breakers. (Note: compression terminals do not come with the product).<br />
Each bar allows the connection of 10 circuit-breakers each.<br />
Default configuration for 20 circuit-breakers. First bar (left) for circuit-breaker 1 to 10 and the second bar (right) for circuit-breakers 11 to 20.<br />
Bars (0VDC) entry: Two copper bars installed in the vertical position side by side, delayed in depth from each other. Allows distribution of 10 + 10 outputs 0V through 20 eyelet 2.5mm² terminals.<br />
<br />
PLATE INSULATION<br />
Inserted for separation between the negative and the positive bar.<br />
<br />
TERMINAL EARTH<br />
Ground Screw M5 welded to the housing at the back, for pressure wired terminal to 16mm²<br />
<br />
PORT-LABEL<br />
In acetate with paper label numbered from 1 to 20, fixed on the front panel above the circuit-breakers.<br />
<br />
BLIND COVER<br />
They are placed in all vacant positions.<br />
<br />
PRODUCT ADVANTAGES:<br />
• It allows the removal / replacement of individual breaker, even on operation;<br />
• Allows installation of many types of circuit-breakers, adjusting input bars (-48VCC);<br />
• numbered label 1 to 20, for identification of the circuit-breaker;<br />
• Current capacity to 400A.<br />
 <br />
INSTALLATION ACCESSORIES ACCOMPANYING THE PRODUCT<br />
• 1 fixing kit containing:<br />
 - 4 cage nuts M5;<br />
 - 4 screws M5X16 nickel;<br />
 - 4 flat washers 3/16 '' (M5) nickel.<br />
<br />
NOTE:<br />
It can be delivered without circuit-breakers if customer interest.