SuKo Polymer Machine Tech Co., Ltd.

1. PTFE complete set of equipment manufacturers - pipe pushing machine line: pipe extruder, mold design, heating ring, automatic feeding one-stop service;

2. PLC intelligent control: continuous extrusion, self-sintering, self-adjusting concentricity, automatic feeding;

3. Extrusion tube quality: smooth surface like mirror, high tensile strength, high tensile strength, high density;

4. Professional technical guidance: installation and commissioning, operation and operation, process setting, maintenance, after-sales service, raw material channels.

First, the equipment operating environment requirements
1. The site floor is required to be flat, and the site load is not less than the design regulations.

2. The operation platform needs clean space to reduce dust ingress, and it is best to have ventilation ducts in the workshop to facilitate ventilation and heat dissipation.

3. Industrial electricity standard 380V 50Hz 3P, voltage can be customized according to user needs.

4. Space configuration distribution cabinet, compressed air and other supporting equipment.

5. The equipment needs to be equipped with a cooling water system, and two barrels/water tanks can be used with cooling pumps to recycle water resources.

6. It is recommended to control the room temperature of the plant not higher than 28 °C.

7. Longitudinal vertical extrusion equipment is extruded from top to bottom, the equipment is installed on the platform or floor, and the space height is about 3.2-3.8 meters.

8. It is necessary to consider the effective distance of the longitudinal direction of the equipment, and ensure sufficient height under the fixed round hole of the equipment to meet the requirements of the length of the extruded tetrafluorine tube.