Description
introduce DTWL-30G high-precision incubator (-30°C~65°C/ - 30°C~75°C/- -30°C~80°C) is a specially designed incubator with air as the heat transfer medium. It has the technical characteristics of high temperature control accuracy, good temperature field uniformity and small fluctuations. There are many thermometers that cannot touch the liquid constant temperature source and are not suitable for calibration in the constant temperature bath. The advent of high-precision temperature chambers solves the calibration problem of such instruments, fills the gap of constant temperature sources, and provides a complete solution. features ◇ Using constant temperature liquid bath technology, the temperature field is more constant Temperature control adopts liquid bath constant temperature and plate heating technology. After the liquid medium is controlled to a constant temperature in the thermostatic bath, it is circulated outside the working chamber. By means of thermal radiation, the temperature in the working chamber is constant and uniform. The cooling method has a qualitative leap in the temperature index. ◇ Intelligent Fusion measurement technology and Internet of Things technology, wifi remote control, making measurement simpler. HIGH-DEFINITION TOUCH SCREEN CONTROL, MULTI-TOUCH, GREATLY ENHANCE THE USER EXPERIENCE. One-click start, fully automatic control, shorten the training cycle of measuring personnel. Timer on/off, remote on and off, save time, improve verification efficiency. ◇ Wide temperature range High-precision oven series products can provide a constant temperature environment in the range of -40 °C ~ 100 °C Complies with JJF1407-2013 WBGT Index Instrument Thermometer Calibration Procedure Complies with JJF1366-2012 Calibration Specification for Temperature Data Acquisition Instruments ◇ High-precision gas bath constant temperature source The use of high-precision temperature control sensors, with the imported temperature control table did not achieve high-precision temperature control, the indication deviation is small ◇ Excellent quality The shell adopts thick plate phosphating, passivation, spraying, anti-corrosion, anti-rust, salt spray resistance; ◇ Sus304 is adopted for the inner tank High-precision sensor, using imported high-precision platinum resistance sensor function ◇ HD touch The use of high-resolution capacitive screen, the display is clearer, support multi-touch, in line with the customer's mobile phone touch operation habits. ◇ Wifi control The mobile phone/pad remotely sets the temperature, starts and stops the device, and reads the current temperature value and the degree of fluctuation and other device status. ◇ Status prompt Real-time calculation and display of temperature fluctuations, prompt to reach a steady state, U disk insertion detection, wifi connection prompts. ◇ Curve display The temperature curve is displayed in real time, support touch zoom and pan operation, and save the curve to the USB stick with one click screenshot. ◇ Data logging Temperature data is automatically saved in xls format and exported to a USB stick with one click. ◇ Timed boot The system has a timed boot function, which can realize the equipment to start before work, and start working immediately after work without waiting. ◇ Multi-point calibration Supports multi-point calibration of temperature and humidity sensors, and can perform multi-point correction of temperature sensors and indication values to ensure consistency with standards. ◇ Segmented control The temperature adopts the segmented PID control scheme, which is fast and stable, and the "zero" overshoot is overshooted. ◇ Fan speed regulation The main circulation fan of the inner cavity adopts frequency conversion speed regulation, and the fan speed can be set through the touch screen. ◇ Multiple protection alarms Constant temperature bath overheat protection, liquid level alarm; Compressor overheating alarm, start-stop protection function ◇ Communication extension Equipped with network port, wifi interface, USB interface, RS-232 interface, can communicate with the PC to achieve data reading and system settings. Features: High-definition touch screen: The use of high-resolution capacitive screen, the display is clearer, support multi-touch, in line with the customer's mobile phone touch operation habits. Wifi control: Mobile phone /pad remotely set the temperature, start and stop the device, read the current temperature value and fluctuation degree and other device status. Status tips: real-time calculation and display of temperature fluctuations, to reach the steady state prompt, detection of U disk insertion, wifi connection prompts. Curve display: real-time display of temperature curve, support touch zoom and panning operation, one-click screenshot and save curve to U disk. Data logging: Temperature data is automatically saved in xls format and exported to a USB stick with one click. Timed start: The system has a timed start function, which can realize the timed start of the equipment before going to work, and start working immediately after work without waiting. Multi-point calibration: Supports multi-point calibration of temperature and humidity sensors, and can perform segmented multi-point correction of temperature sensors and display values to ensure compliance with standards. Segmented control: The temperature adopts the segmented PID control scheme, which is fast and stable, and the "zero" overshoot is overshooted. Fan speed regulation: The main circulation fan in the inner cavity adopts frequency conversion speed regulation, and the fan speed can be set through the touch screen. Multiple protection alarms: constant temperature bath overheating protection, liquid level alarm/compressor overheating alarm, start-stop protection function Communication extension: with network port, wifi interface, USB interface, RS-232 interface, can communicate with the PC, to achieve data reading and system settings.
- Test chamber
- super paper temperature environment
- temperature and humidity verification box
- standard constant temperature
- constant temperature test chamber
- temperature chamber
Production Capacity:
11
Delivery Timeframe:
Within 30 Days
Incoterms:
CPT - Carriage Paid to
DDP - Delivered Duty Paid
DEQ - Delivered Ex Quay
EXW - Ex Works
Packaging Details:
Not informed
More about
Tai 'an Dearto Automation Instrument Co.,Ltd
50-100
Employees
500K - 1M
Sales volume (USD)
20%
% Export sales
Year
Established
Business type
- Importer / Trading Company
Keywords
- Thermostatic bath
- temperature and humidity measuring instrument
- surface temperature calibrator
- digital display thermometer
- blackbody radiation source
- thermocouple calibration furnace
- temperature and humidity detector
- constant temperature oil bath
- intelligent dry body furnace Ver Mais
Contact and location
- Dicke Chen
- +86 538 xxxxxxxx
- 泰安 / 山东省 | China