Tianjin Icason Technology Co., Ltd

Brief Introduction:<br />
DCP is white crystalline.Melting point of 41 - 42 ℃. Relative density of 1.082.Decomposition temperature 120 - 125 ℃ room temperature stable. Gradually become yellowish under light. Insoluble water, soluble ethanol, ether,acetic acid, benzene and petroleum ether.<br />
 <br />
Theoretical Active Oxygen 5.92% (purity 100%), 5.62% (95% purity);<br />
Half Life Data:<br />
100hr, Half Life Temp………101℃<br />
10hr, Half Life Temp………117℃<br />
1min, Half Life Temp……171℃<br />
 <br />
Type 1,DCP 99%,Crystal<br />
Specification:<br />
 <br />
Testing ItemFirst Glass<br />
AppearanceWhite crystal<br />
Purity,%99.5 min<br />
Melting point,℃39.0 min<br />
Total volatile content,%0.20 max<br />
Melt color (Pt-Co)100 max<br />
 <br />
 <br />
 <br />
Application:

An efficient organic peroxide crosslinking agent for PE,EVA,EPR,Siclione and VAE.
Crosslinking agent for EVA foam sheet,EVA shoe sole,PE foam.
Initiator of polymerization of styrene, mainly used for EPS resin.
Initiator/crosslinking agent for XLPE,mainly used for cable insulation material.
Curing agent or hardener for UP resin,acrylate resin.

 <br />
 <br />
Type 2, DCP 40% with carrier CaCO3, powder form<br />
 <br />
Specifications:<br />
 <br />
Testing ItemFirst Glass<br />
AppearanceWhite powder<br />
DCP content,%39-41<br />
Active oxygen content,%2.28-2.4<br />
Calcium carbonate content,%59-61<br />
Volatile,%≤0.01<br />
Screen residue rateA.28.5% max(80meshes)<br />
B.5%max(40meshes)<br />
C.0%(30meshes)<br />
 <br />
Application:<br />
It is mainly used as crosslinking agent for synthetic rubber.<br />
 <br />
 <br />