Vec-Solutions

Description: <br />
The differential pressure transmitter can be installed on top of the ceiling of the room, lock or hallway. <br />
Two pressure taps are urged in the ceiling of the room, or hallway lock and two ¼ hoses are connected and interconnected to the differential pressure transmitter <br />
CXULP. <br />
<br />
A source of 24 Vdc feeds CXULP transmitter that sends the signal 4-20 mA differential pressure through a 2 X 22 AWG shielded cable that goes into wall-mounted or ceiling pipe until the LCD display which is also embedded in wall of the room, or hallway and lock the LCD display relays this signal 4-20 mA differential pressure to a control system or supervisory. <br />
<br />
The above same description can be applied to the sensors of temperature and relative humidity.<br />
<br />
<br />
<br />
Technical Details: <br />
<br />
Pressure ranges: + / - 25.4 Pa, + / - 63.5 Pa, + / - 127 Pa (maximum 0-127 <br />
Pa). <br />
Accuracy + / - 0.4% of full scale or + / - 0.8% of range <br />
Stability: <0.2% Full Scale (FSO) <br />
Thermal effects: (1 "WC <4" WC) <0.125% FSO / C <br />
Maximum tolerated Pressure: 1 PSI <br />
Compensated temperature range: 10-50 ° C <br />
Operating temperature: -25 to 70 º C <br />
Use: Any air dry, non-conductive and inert gas <br />
Operating Humidity: Less than dewpoint <br />
Supply: 24Vdc Maximum consumption 684 milliwatts (30 mA) <br />
Output Signal: 4 to 20 mA Volts <br />
Connection: 2 wires (24V and output 4 to 20 mA) <br />
Dimensions: 40x40x40 mm <br />
Weight: 30 g<br />
<br />