Internal Chamber with useful capacity of 1,200 liters confectioned in stainless steel sheet 304 brushed, comprised of dividers in stainless steel with rounded corners suitable for accommodation of trays determined by two to two with the concern not to cause accidents with the operator/lose useful area of the House, with creases to facilitate the Elimination of condensate through rear drain. Internal deflector developed to facilitate the internal air circulation, guaranteeing an excellent uniformity of temperature and humidity.
External structure made of stainless steel sheet brushed 430 composed of side covers and lock mounted on swivel casters, 06 03 front with brake system, which facilitates the transfer of equipment both in your installation as in technical assistance and occasions.
The control panel is located on the side of the compound structure of electronic controller of temperature and humidity, electronics drive system of triggering alarms for lack of water, energy, moisture and other.
The camera still has a clever system of shutting down the air circulation system when opening the door, thereby providing energy savings and better speed of response of the control system and moisture generation to reset itself after the stops for the surveys or test supply.
The control system of temperature and humidity have a communication system of functioning of the Board as well as the serial output (RS485 or 4-20mA) for logging/monitoring via software, made through a rear cable with connectors that allows the control of humidity, temperature and the security plates.
The temperature control is done through a controller and microprocessor based digital indicator of four digits with PID system with LCD display (Liquid Crystal Display) that provides the temperature ramp/level, sensitivity of ± 0.1 ° C, solid state relay and type Pt100 temperature sensor encapsulated in stainless steel 304 tube to improve read performance.
The humidity control system is done through a controller and microprocessor based digital indicator, four-digit PID system with LCD display (Liquid Crystal Display), sensitivity of ± 0.1% RH, solid state relay and capacitive probe that provides better speed of response/relative humidity control.
The humidity generation system consists of a set of constant level conjugated to a boiler with electric resistance that works with water at low temperature, resulting in significant energy savings and ease of humidity control. The camera also has a water recycling system that avoids the constant feedback of the water reservoir and the unwanted replacements during the night or weekends.
The air circulation system is formed by a set fan bike properly balanced and designed to provide an excellent internal circulation and consequently a good uniformity of temperature and humidity inside the Chamber, even when the same is with load.
Front door made internally in 304 stainless steel sheet and externally made of 430 stainless steel sheet with double silicone sealing brushed to prevent escape of steam, heat insulation in expanded polyurethane with stainless steel rod and close cremona with key supported on side hinges non-ferrous material.
The cooling system consists of an airtight freezer unit located to the bottom of the ecological House, which provides a complete use of the inner Chamber, decreasing the external dimensions, suitable for those who have problems of little space or need more than one camera in your lab.
Operating range-temperature: 20 to 60° C
-Operating range: Humidity 20 to 90% RH
No maximum Temperature Homogeneity: ± 0.5° C to 25° C
Maximum instability of temperature: ± 0.1° C to 25° C
Maximum instability of humidity: ± 0.8% RH at 50% RH >
Power supply: 220V/60 Hz
Useful internal measures (L x F x): 850 x 850 x 1600 mm
Approximate External measurements (L x F x): 960 x 1050 x 2100 mm
Approximate weight: 200 kg
Accompanies: instruction Manual; power cord and wire trays 05 made of stainless steel 304.
Optional services: the RBC calibration certificate temperature/humidity controller, isothermal test and qualification Protocol supply installation (IQ/OQ/PQ).