Wuxi Aike Sealing Technology Co.,Ltd

K Series are multi-way rotary joints designed for middle and high speed high-pressure applications. They are used on machining center revolving tables, hydraulic workstations, coiling machines, wind generators, centrifugal machines and etc. ial carbon steel. If other material is required, please inform beforehand.
Main Features:
Supported by double high-precision maintenance-free bearings for high stability.
Special sealing structure designed for high-speed and high-pressure application that provides prolonged failure-free operation.
Low rotation torque.
Special structure to be free from friction heat under high speed.
Running torque unaffected by working pressure and temperature change.
Max working speed up to 6500RPM.
Drainage hole design to avoid exterior contamination.
Customization available for different customer applications.
Technical Ratings
Max Speed：6500 r/min Temperature：-30～+80℃
Max Pressure：30Mpa Media：Hydraulic Oil
Notes:
1.K Series use labyrinth sealing structure. During installation and operation, the drainage hole L must be connected by oil pipe to the oil collection tank. And the oil pipe must not be blocked to avoid back-pressure.
2.Inner leakage is allowed between each passage. Please pay attention to the compatibility of different working media to avoid crossed contamination.
3.The working fluid or hydraulic media should be filtered before being ued. The filtration precision should be no lower than 10um.
4.Working temperature rise will reduce the viscosity of the working fluid to increase the leakage volume. So during operation, cooling device should be accompanied.
5.The hydraulic system should be equipped with automatic pressure regulator to compensate the pressure loss caused by inner leakage.