WQ series Electric submersible Waste pump--a cutting device Product Overview WQ series of electric submersible sewage pump series and cutting device is based on GB/T 24,674-2009 years waste...

WQ series Electric submersible Waste pump--a cutting device Product Overview WQ series of electric submersible sewage pump series and cutting device is based on GB/T 24,674-2009 years waste submersible motor pump manufacturing. It reduces the structure of the pump, with two sets of independent bulk mechanical seals, wear-resistant silicon carbide grinding block, stainless steel rotating shaft, standard stainless steel exposed part and 10 m long cable. Based on the common WQ electric submersible Sewage pump series, it is added with a cutting blade that can cut long fibers, plastics, paper, ribbons, strips, straws, ropes and other impurities in the water, and then put the impeller rotation. A dry-type motor and a hard alloy mechanical seal pump are particularly suitable for pumping fluids as very dirty, containing hard solids and fibres as well as sticky and synovial fluids. Product use It is used in basement sewage discharge, civil aviation defensive hole, subway stations and other underground areas as well as the extraction of slurry from industrial and mining enterprises related to food, papermaking, brewing, steel and non-ferrous metals, leather, cement plant and human and animal feces and urine from chicken and pig farms, breeding industries, septic tanks and other places. 1 The outlet of the pump flow should not be greater than the rated value (that is, the pump must use the specified elevator range); 2 submerged depth must not exceed 5 meters, otherwise, it should be pointed out that when the order; 3 water temperature shall not exceed + 40°c; 4 PH valve must be 5 ~ 9; 5 rated voltage:380 V or 660 V, allowing fluctuating ±10%; frequency:50 Hz; 6 volume ratio medium liquid-solid substance: QXN series built-in submersible electric pump Product Overview: QXN Series built-in submersible hydropower project pump is based on GB/T 25409 2010 Small Submersible Motor-pump manufacturing. This kind of pump uses 10 meters long cable. Develop a dry or oil-immersed motor and pump connection through the direction, it is a part of the outer barrel and the water inflow structure of a unique, low suction, upper discharge and self cooling cooling motor, to achieve a good cooling effect, the disadvantage of other submersible pump, you can ' t operate without avoiding the water and electric pump life greatly extended. The pump features a small outside diameter, light weight, low suction structure, easy to operate, good ship bilge, infrastructure construction with each passing day, mines and other operating surface shallow drainage capacity. In addition, the pump design and suction end Flange interface can be used as pipeline pump pressurized water supply and other areas of high-rise building and pressurized agricultural irrigation irrigation. Product use: It is suitable for the operation of the surface of Water conservancy, urban construction projects, industrial and mining enterprises, such as drainage, ship bilge drainage, agricultural irrigation and drainage, well lifting, pressurized water supply, high-rise buildings and infrastructure construction site drainage. 1 The outlet of the pump flow should not be greater than the rated value (that is, the pump must use the specified elevator range); 2 submerged depth must not exceed 5 meters, otherwise, it should be pointed out that when the order; 3 water temperature shall not exceed + 40°c; 4 PH valve must be 5 ~ 9; 5 The volume ratio of solid particles in sewage should be less than 2%, and the viscosity should be less than 5 s; 6 solid particles should be able to pass through the strainer or grille.

Ler mais