Ningbo tuoxing precision casting co. LTD

Casting of carbon steel is also used for the forging of alloy steel and forged steel parts. There are now two methods of carbon steel casting: wet casting and dry casting. Wet carbon steel casting: Carbon steel parts are made by the investment casting process. Starting this process requires a huge investment and is very time-consuming. If you want to cast a small number of parts, you can do it by wet casting. This takes longer, but the quality of the product produced is much better. There are two basic types of alloy steel castings – hot rolled and cold rolled. When the final product is lighter than cold rolled, hot roll casting is usually used. The process involves pouring the molten zinc and magnesium alloys into the hopper. Once cooled, the composition passes through the mold, melting and hardening the alloy. When precision is more important than strength, cold-rolled casting is used. A low alloy steel foundry is a machine capable of melting zinc and magnesium alloys at extremely high temperatures using electric motors. It is used to manufacture a wide range of products, including high-quality automotive parts, aircraft parts, military hardware and railway equipment. Typically, they are run by an induction heating system that uses a small current to rapidly heat zinc and magnesium alloys. These alloys are very strong, but extremely dense, which means they require a special dye to make them with great force. Ningbo Tuoxing Precision Casting Co., Ltd. is a professional carbon steel casting manufacturer and alloy steel casting supplier. We produce foundry products in our own foundries.